Sourcing workspace
Profile updated 19 Oct 2026

ClassOne Equipment

Also known as ClassOne Equipment, Inc.

Type not confirmedLocations reported in United Statesclassoneequipment.com
AI visibility scorecardHow much can an AI assistant tell a buyer about ClassOne Equipment?We scored this profile on the 8 questions buyers’ AI agents ask first, and ranked it against similar suppliers nearby.See the score

About

ClassOne Equipment offers refurbished plasma etch and PECVD equipment from Oxford Instruments and Plasma-Therm.

ClassOne Equipment says its worldwide success dates back to 2002 and describes its work as including semiconductor equipment service and support.

Products

31 listed

Solstice Wet Etch

Wet etch system with face-down processing, end-point detection, and face-up SRD; listed processes include UBM etch, patterned metal etch, KOH etch, TSV cleans, and RCA cleans.

Source & evidence

Supplier website
Solstice Wet Etch High performance, better CoO, improved safety Face-down processing, end-point detection, face-up SRD Key processes: UBM etch, patterned metal etch, KOH etch, TSV cleans, RCA cleans
ClassOne Equipment website
Checked 19 Oct 2026

Takano WM-10

Particle inspection system for particle measurement on ≤300mm unpatterned wafers, with high-sensitivity measurements on bare or filmed wafers and 48nm detection sensitivity.

Source & evidence

Supplier website
This is the advanced technology solution for particle measurement on ≤300mm unpatterned wafers and the new industry-preferred replacement for legacy Surfscan® systems, The Takano WM-10 offers high-sensitivity particle measurements on bare or filmed wafers. This tool can deliver reliable 48nm detection sensitivity
ClassOne Equipment website
Checked 19 Oct 2026

Solstice Single-Wafer Electroplating Tools

Automated single-wafer platform for electroplating and other wet-processing applications, configurable with up to eight chambers.

Source & evidence

Supplier website
The Solstice® automated single-wafer platform offers advanced electroplating technologies, from gold and copper to nickel and indium, on a single, flexible and compact system. Elegantly designed from the ground up, Solstice continues to be one the most flexible wet-processing platforms available. It enables solutions with up to 8 chambers for multiple plating, solvent and wet etch applications, suitable for both R&D and high-volume manufacturing environments.
ClassOne Equipment website
Checked 19 Oct 2026

Solstice MLO and Photoresist Strip

Automated single-wafer solvent system for MLO, photoresist strip, and polymer removal, with removal without wet transfers.

Source & evidence

Supplier website
Solstice MLO and Photoresist Strip High-performance single-wafer automated solvent Effective strip and removal without wet transfers Key processes: MLO, photoresist strip, polymer removal
ClassOne Equipment website
Checked 19 Oct 2026

Solstice CopperMax

Cationic membrane-based copper plating for copper pillar, copper TSV and TWV, copper RDL, and copper damascene.

Source & evidence

Supplier website
Solstice CopperMax Cationic membrane-based copper plating for: copper pillar, copper TSV and TWV, copper RDL, copper damascene
ClassOne Equipment website
Checked 19 Oct 2026

Solstice Packaging

Metal stacks for AP techniques, including nickel plating, copper pillar, solder bump, and alloys.

Source & evidence

Supplier website
Solstice Packaging Metal stacks for AP techniques: Nickel plating, copper pillar, solder bump, alloys and more
ClassOne Equipment website
Checked 19 Oct 2026

Takano WM-10R

Particle inspection system selected by Beneq as its primary particle scanner.

Source & evidence

Supplier website
ClassOne Equipment announced today that Beneq has selected the Takano WM-10R as its primary particle scanner.
ClassOne Equipment website
Checked 19 Oct 2026

Solstice GoldPro

For fine feature gold fill, gold TWV, and through-mask gold plating.

Source & evidence

Supplier website
Solstice GoldPro World-class uniformity and speed for: fine feature gold fill, gold TWV, through mask gold plating
ClassOne Equipment website
Checked 19 Oct 2026

Takano WM-7SR Particle Inspection Systems

Particle inspection system designed for ≤300mm and ≤200mm wafers.

Source & evidence

Supplier website
Takano Wafer Inspection Systems Specifically designed for ≤300mm and ≤200mm wafers – these are the ideal new-technology replacements for out-of-date Surfscan® tools. Already fab-proven across Asia, Takano systems are now available in North America and Europe – exclusively from ClassOne Equipment. Learn more about the Takano WM-7SR Particle Inspection Systems.
ClassOne Equipment website
Checked 19 Oct 2026

YES 3

A YES refurbished oven model.

Source & evidence

Supplier website
ClassOne's YES Refurbished Models: YES 3 YES 3-10 YES 5 YES 58 YES 8 YES 15 YES 1518 YES 450 PB YES 450 PB6 YES 450 PB8
ClassOne Equipment website
Checked 19 Oct 2026

YES 3-10

A YES refurbished oven model.

Source & evidence

Supplier website
ClassOne's YES Refurbished Models: YES 3 YES 3-10 YES 5 YES 58 YES 8 YES 15 YES 1518 YES 450 PB YES 450 PB6 YES 450 PB8
ClassOne Equipment website
Checked 19 Oct 2026

YES 5

A YES refurbished oven model.

Source & evidence

Supplier website
ClassOne's YES Refurbished Models: YES 3 YES 3-10 YES 5 YES 58 YES 8 YES 15 YES 1518 YES 450 PB YES 450 PB6 YES 450 PB8
ClassOne Equipment website
Checked 19 Oct 2026

YES 58

A YES refurbished oven model.

Source & evidence

Supplier website
ClassOne's YES Refurbished Models: YES 3 YES 3-10 YES 5 YES 58 YES 8 YES 15 YES 1518 YES 450 PB YES 450 PB6 YES 450 PB8
ClassOne Equipment website
Checked 19 Oct 2026

YES 8

A YES refurbished oven model.

Source & evidence

Supplier website
ClassOne's YES Refurbished Models: YES 3 YES 3-10 YES 5 YES 58 YES 8 YES 15 YES 1518 YES 450 PB YES 450 PB6 YES 450 PB8
ClassOne Equipment website
Checked 19 Oct 2026

YES 15

A YES refurbished oven model.

Source & evidence

Supplier website
ClassOne's YES Refurbished Models: YES 3 YES 3-10 YES 5 YES 58 YES 8 YES 15 YES 1518 YES 450 PB YES 450 PB6 YES 450 PB8
ClassOne Equipment website
Checked 19 Oct 2026

YES 1518

A YES refurbished oven model.

Source & evidence

Supplier website
ClassOne's YES Refurbished Models: YES 3 YES 3-10 YES 5 YES 58 YES 8 YES 15 YES 1518 YES 450 PB YES 450 PB6 YES 450 PB8
ClassOne Equipment website
Checked 19 Oct 2026

YES 450 PB

A YES refurbished oven model.

Source & evidence

Supplier website
ClassOne's YES Refurbished Models: YES 3 YES 3-10 YES 5 YES 58 YES 8 YES 15 YES 1518 YES 450 PB YES 450 PB6 YES 450 PB8
ClassOne Equipment website
Checked 19 Oct 2026

YES 450 PB6

A YES refurbished oven model.

Source & evidence

Supplier website
ClassOne's YES Refurbished Models: YES 3 YES 3-10 YES 5 YES 58 YES 8 YES 15 YES 1518 YES 450 PB YES 450 PB6 YES 450 PB8
ClassOne Equipment website
Checked 19 Oct 2026

YES 450 PB8

A YES refurbished oven model.

Source & evidence

Supplier website
ClassOne's YES Refurbished Models: YES 3 YES 3-10 YES 5 YES 58 YES 8 YES 15 YES 1518 YES 450 PB YES 450 PB6 YES 450 PB8
ClassOne Equipment website
Checked 19 Oct 2026

Locations & websites

2 locations · 1 website

Corporate HQ

5302 Snapfinger Woods Drive, Atlanta, Georgia 30035

Atlanta, United States

Source & evidence

Supplier website
ClassOne Equipment, Inc. Corporate HQ 5302 Snapfinger Woods Drive Atlanta, Georgia 30035 United States Tel: +1 (770) 808-8708 Equipment Inquiries: Sales@ClassOneEquipment.com Parts Inquiries: Parts@ClassOneEquipment.com Service & Support Inquiries: Support@ClassOneEquipment.com
ClassOne Equipment website
Checked 19 Oct 2026

Key capabilities

CapabilityDocumented scopeSupporting source
Field Service SupportField service support for listed semiconductor equipment, including Semitool, KLA-Tencor, Suss, YES, Plasmatherm, Oxford, Takano, and ASML tools.
Source & evidence

Supplier website
We offer Field Service Support on these tools and more: Semitool: SST, SAT, SRD, LT210, Equinox & Raider KLA-Tencor: 5xxx, 6xxx; AIT 1, 2, XP+; SP1, UV10xx, UV12xx; F5x, and more… Suss: MJB3, MJB4, MA6, MA8, MA150, SB6, SB8, and more… YES: 15, 450, 1518, 8, 5, 58, 3, 310, G1000, and more… Plasmatherm: 720, 770, 790, and more… Oxford: 80, 80+, 100, 133, and more… Takano: WM-7S, WM-7SR, WM-10, WM-10R, and more… ASML: Steppers 2500, 5000, & 5500
ClassOne Equipment website
Checked 19 Oct 2026

Equipment repair and refurbishmentRepairs and refurbishes semiconductor manufacturing equipment, including key sub-assemblies and robots from Semitool, SUSS MicroTec, and KLA.
Source & evidence

Supplier website
Utilizing our refurbishment experience, we also offer repair and refurbishment services for key sub-assemblies and robots from manufacturers Semitool, SUSS MicroTec, and KLA.
ClassOne Equipment website
Checked 19 Oct 2026

Legacy mask aligner service and supportService and support for legacy mask aligners, including the MJB3, Gen2 MA6 and MA8, MA150cc/MA150e, and MA200cc/MA200e systems.
Source & evidence

Supplier website
The division is widely recognized for refurbishing and supporting legacy mask aligners, including the MJB3, Gen2 MA6 and MA8, MA150cc/MA150e, and MA200cc/MA200e systems.
ClassOne Equipment website
Checked 19 Oct 2026

Customer-owned assembly refurbishmentProvides full refurbishment services for customer-owned assemblies, such as Semitool Lift-Rotates and Semitool Robots.
Source & evidence

Supplier website
We also specialize in full refurbishment services for customer-owned assemblies such as Semitool Lift-Rotates and Semitool Robots.
ClassOne Equipment website
Checked 19 Oct 2026

Field service and maintenanceInstallation, operations training, upgrades, field troubleshooting, and preventive maintenance support.
Source & evidence

Supplier website
Factory trained technicians available for professional installation, operations training, upgrades, as well as field service support from tool down trouble-shooting to preventive maintenance and trouble-shooting support.
ClassOne Equipment website
Checked 19 Oct 2026

Upgrades and retrofitsDevelops upgrades and retrofits for aging tools, including PLCs, CPUs, and drain assemblies.
Source & evidence

Supplier website
We have also developed new upgrades and retrofits for aging tools that need modernization – like YES Oven PLCs, TePla Asher PLCs, Semitool CPUs, Semitool Drain Assemblies, and many more.
ClassOne Equipment website
Checked 19 Oct 2026

KLA-Tencor AIT service and maintenanceService and maintenance solutions for an extensive range of KLA-Tencor AIT systems.
Source & evidence

Supplier website
ClassOne Equipment provides service and maintenance solutions for an extensive range of KLA-Tencor AIT systems.
ClassOne Equipment website
Checked 19 Oct 2026

Installation, training, and post-sale supportProfessional installation and training, post-sale service, and spare parts support.
Source & evidence

Supplier website
We provide a turn-key solution, from fully remanufactured system, to professional installation and training, as well as post-sale service and spare parts support.
ClassOne Equipment website
Checked 19 Oct 2026

KLA-Tencor Surfscan SP1 service and maintenanceService and maintenance solutions for KLA-Tencor Surfscan SP1 systems.
Source & evidence

Supplier website
ClassOne Equipment announced new service and maintenance solutions for KLA-Tencor Surfscan SP1 systems.
ClassOne Equipment website
Checked 19 Oct 2026

Installation and trainingProvides installation and training at the customer’s facility.
Source & evidence

Supplier website
Our factory-trained technicians provide a complete turn-key solution from a fully refurbished system meeting original specifications to installation and training at your facility with after-sales service and parts support.
ClassOne Equipment website
Checked 19 Oct 2026

Spare parts and field service supportProvides spare parts and field service support for equipment.
Source & evidence

Supplier website
Since 2002, we've been providing our customers not just with superior semiconductor equipment, but also with the spare parts and field service support you need to keep your equipment delivering top performance.
ClassOne Equipment website
Checked 19 Oct 2026

Etch/PECVD equipment refurbishmentProvides refurbished systems meeting original specifications.
Source & evidence

Supplier website
Our factory-trained technicians provide a complete turn-key solution from a fully refurbished system meeting original specifications to installation and training at your facility with after-sales service and parts support.
ClassOne Equipment website
Checked 19 Oct 2026

Professional installation and trainingProfessional installation and training for the Takano WM-7SR.
Source & evidence

Supplier website
Professional Installation and Training
ClassOne Equipment website
Checked 19 Oct 2026

Local spare parts and service supportLocal spare parts and factory-trained service support.
Source & evidence

Supplier website
Local spare parts and factory trained service support
ClassOne Equipment website
Checked 19 Oct 2026

After-sales service and parts supportProvides after-sales service and parts support.
Source & evidence

Supplier website
Our factory-trained technicians provide a complete turn-key solution from a fully refurbished system meeting original specifications to installation and training at your facility with after-sales service and parts support.
ClassOne Equipment website
Checked 19 Oct 2026

System Audits (health check)System audits described as health checks.
Source & evidence

Supplier website
System Audits (health check)
ClassOne Equipment website
Checked 19 Oct 2026

Emergency Tool-Down ServiceEmergency service for tool downtime.
Source & evidence

Supplier website
Emergency Tool-Down Service
ClassOne Equipment website
Checked 19 Oct 2026

Installation and Training ServiceInstallation and training service.
Source & evidence

Supplier website
Installation and Training Service
ClassOne Equipment website
Checked 19 Oct 2026

Preventative Maintenance ServicePreventative maintenance service.
Source & evidence

Supplier website
Preventative Maintenance Service
ClassOne Equipment website
Checked 19 Oct 2026

System Upgrades & RetrofitsSystem upgrades and retrofits.
Source & evidence

Supplier website
System Upgrades & Retrofits
ClassOne Equipment website
Checked 19 Oct 2026

Tool Relocation ServicesTool relocation services.
Source & evidence

Supplier website
Tool Relocation Services
ClassOne Equipment website
Checked 19 Oct 2026

Service ContractsService contracts.
Source & evidence

Supplier website
Service Contracts
ClassOne Equipment website
Checked 19 Oct 2026

Company updates

Beneq Selects 300mm Takano WM-10R Particle Inspection System from ClassOne Equipment

17 Sept 2024

Beneq selected the Takano WM-10R as its primary particle scanner.

Source & evidence

Supplier website
September 17, 2024 – ClassOne Equipment announced today that Beneq has selected the Takano WM-10R as its primary particle scanner. [Publication date evidence: September 17, 2024]
ClassOne Equipment website
Checked 19 Oct 2026

Technical University of Denmark Unveils New System

20 Jun 2023

ClassOne Equipment announced the sale of a Takano WM-7SR particle measurement system to DTU Nanolab.

Source & evidence

Supplier website
June 20, 2023 – ClassOne Equipment announced the sale of its advanced new Takano WM-7SR particle measurement system to the DTU Nanolab at the Technical University of Denmark. [Publication date evidence: June 20, 2023]
ClassOne Equipment website
Checked 19 Oct 2026

Takano Particle Detection System Delivered to EUV Tech

5 Jun 2023

ClassOne Equipment announced delivery of a Takano WM-10 particle measurement system to EUV Tech.

Source & evidence

Supplier website
June 5, 2023 – ClassOne Equipment announced the delivery of its advanced new Takano WM-10 particle measurement system to EUV Tech [Publication date evidence: June 5, 2023]
ClassOne Equipment website
Checked 19 Oct 2026

ClassOne Equipment Provides Neuralink New Equipment

24 Apr 2023

ClassOne Equipment announced the sale of a Takano particle measurement system to Neuralink Corp.

Source & evidence

Supplier website
April 24, 2023 – ClassOne Equipment has announced the sale of its advanced new Takano particle measurement system to Neuralink Corp. [Publication date evidence: April 24, 2023]
ClassOne Equipment website
Checked 19 Oct 2026

New Lot of Used Semiconductor Tools for Resale

2 Nov 2022

ClassOne Equipment announced a new lot of more than 80 production tools for resale.

Source & evidence

Supplier website
November 2, 2022 – ClassOne Equipment has announced the release of a new lot of more than 80 highly-desirable production tools. [Publication date evidence: November 2, 2022]
ClassOne Equipment website
Checked 19 Oct 2026

Acquisition of Fab's Complete Chip Manufacturing Line

20 Jul 2022

ClassOne Equipment announced acquisition of a fab’s complete line of production tools for resale.

Source & evidence

Supplier website
July 20, 2022 – ClassOne Equipment has announced its acquisition of a major fab’s complete line of production tools for resale. [Publication date evidence: July 20, 2022]
ClassOne Equipment website
Checked 19 Oct 2026

SEMICON West: ClassOne Equipment to Show New Particle Inspection System

6 Jul 2022

ClassOne Equipment planned to show the Takano WM-7SR particle inspection system at SEMICON West.

Source & evidence

Supplier website
ClassOne Equipment will be showing the new high-performance Takano WM-7SR particle inspection system in its exhibit at SEMICON West in San Francisco next week [Publication date evidence: July 6, 2022]
ClassOne Equipment website
Checked 19 Oct 2026

New Takano Particle Inspection Systems Replace Outdated Tools

27 Apr 2022

ClassOne Equipment introduced two Takano particle inspection systems for unpatterned wafers and was selected as Takano’s exclusive inspection tool representative for North America, Europe, and Israel.

Source & evidence

Supplier website
ClassOne Equipment has just introduced two new high-performance Takano particle inspection systems for ≤200mm and ≤300mm unpatterned wafers. ClassOne was recently selected to be Takano’s exclusive inspection tool representative for North America, Europe, and Israel. [Publication date evidence: April 27, 2022]
ClassOne Equipment website
Checked 19 Oct 2026

Takano Selects ClassOne Equipment

5 Apr 2022

ClassOne Equipment announced that it would represent Takano bare wafer particle inspection systems.

Source & evidence

Supplier website
ClassOne Equipment, the industry’s leading provider of refurbished semiconductor equipment, will now also be representing a line of brand-new, high-performance bare wafer particle inspection systems from the Japanese manufacturer Takano. [Publication date evidence: April 5, 2022]
ClassOne Equipment website
Checked 19 Oct 2026

ClassOne Equipment Acquires Inventory of former SUSS Reman, Expands Legacy Mask Aligner Service and Support

ClassOne Equipment announced acquisition of inventory from the former SUSS Reman remanufacturing business.

Source & evidence

Supplier website
ClassOne Equipment announced its acquisition of inventory of the former Remanufactured business of SUSS MicroTec SE, known in the semiconductor industry as SUSS Reman.
ClassOne Equipment website
Checked 19 Oct 2026

Evidence & freshness

Every claim keeps its source. Company-reported information and independent verification are labelled separately. Spot something wrong? .

  • ClassOne Equipment websiteSupplier websiteChecked 19 Oct 2026

    Supports 15 facts: Company name · Takano WM-10R · Legacy mask aligner service and support · KLA-Tencor AIT service and maintenance · KLA-Tencor Surfscan SP1 service and maintenance · News: Beneq Selects 300mm Takano WM-10R Particle Inspection System from ClassOne Equipment · News: Technical University of Denmark Unveils New System · News: Takano Particle Detection System Delivered to EUV Tech

    7 more

    News: ClassOne Equipment Provides Neuralink New Equipment · News: New Lot of Used Semiconductor Tools for Resale · News: Acquisition of Fab's Complete Chip Manufacturing Line · News: SEMICON West: ClassOne Equipment to Show New Particle Inspection System · News: New Takano Particle Inspection Systems Replace Outdated Tools · News: Takano Selects ClassOne Equipment · News: ClassOne Equipment Acquires Inventory of former SUSS Reman, Expands Legacy Mask Aligner Service and Support

  • ClassOne Equipment websiteSupplier websiteChecked 19 Oct 2026

    Supports 14 facts: Company name · Description · YES 3 · YES 3-10 · YES 5 · YES 58 · YES 8 · YES 15

    6 more

    YES 1518 · YES 450 PB · YES 450 PB6 · YES 450 PB8 · Field service and maintenance · Installation, training, and post-sale support

  • ClassOne Equipment websiteSupplier websiteChecked 19 Oct 2026

    Supports 14 facts: Company name · Description · Oxford 80 · Oxford 100 · Oxford 133 · Oxford NGP · Oxford Cobra · Plasma-Therm 790

    6 more

    Plasma-Therm SLR · Plasma-Therm VLR · Plasma-Therm Versaline · Installation and training · Etch/PECVD equipment refurbishment · After-sales service and parts support

  • ClassOne Equipment websiteSupplier websiteChecked 19 Oct 2026

    Supports 10 facts: Company name · Description · Field Service Support · System Audits (health check) · Emergency Tool-Down Service · Installation and Training Service · Preventative Maintenance Service · System Upgrades & Retrofits

    2 more

    Tool Relocation Services · Service Contracts

  • ClassOne Equipment websiteSupplier websiteChecked 19 Oct 2026

    Supports 7 facts: Company name · Solstice Wet Etch · Solstice Single-Wafer Electroplating Tools · Solstice MLO and Photoresist Strip · Solstice CopperMax · Solstice Packaging · Solstice GoldPro

  • ClassOne Equipment websiteSupplier websiteChecked 19 Oct 2026

    Supports 5 facts: Company name · Description · Equipment repair and refurbishment · Customer-owned assembly refurbishment · Upgrades and retrofits

  • ClassOne Equipment websiteSupplier websiteChecked 19 Oct 2026

    Supports 4 facts: Company name · Description · high-quality refurbished and pre-owned tools · parts for Semitool, KLA, SUSS, EVG, more

  • ClassOne Equipment websiteSupplier websiteChecked 19 Oct 2026

    Supports 4 facts: Company name · Takano WM-7SR · Professional installation and training · Local spare parts and service support

  • ClassOne Equipment websiteSupplier websiteChecked 19 Oct 2026

    Supports 3 facts: Company name · Description · Spare parts and field service support

  • ClassOne Equipment websiteSupplier websiteChecked 19 Oct 2026

    Supports 2 facts: Company name · Location: Atlanta, United States

  • ClassOne Equipment websiteSupplier websiteChecked 19 Oct 2026

    Supports 2 facts: Company name · Takano WM-7SR Particle Inspection Systems

  • ClassOne Equipment websiteSupplier websiteChecked 19 Oct 2026

    Supports 2 facts: Company name · Takano WM-10

  • electronica 2026 exhibitor directoryTrade-fair listingChecked 26 Sept 2026

    Supports 2 facts: Company name · Location: GA 30035, United States

What to confirm

A starting point for your supplier conversation.

ProductsNo source confirms this yet
Manufacturing processesNo source confirms this yet
Services and capabilitiesNo source confirms this yet
CertificationsNo source confirms this yet
Company typeNo source confirms this yet
Order quantity & lead timeConfirm directly with the supplier

Get in touch

Company contactSales@ClassOneEquipment.com
Contact sources

ClassOne Equipment website · 19 Oct 2026

Company contactSupport@ClassOneEquipment.com
Contact sources

ClassOne Equipment website · 19 Oct 2026

Company contact+1 (770) 808-8708
Contact sources

ClassOne Equipment website · 19 Oct 2026

Business type

AI interpretation; these are estimates, not verification.

Distributor · 15%
Source & evidence

AI-inferred
Based only on `company`, does this company distribute or resell products made by other manufacturers?

Independent distributor / broker · 15%
Source & evidence

AI-inferred
Based only on `company`, is this company an independent distributor or broker that sources components outside manufacturer franchise channels?

Is this your company?

Manage products, locations and the facts buyers and agents can retrieve.

Claim this profile Free. A work email on the company’s domain confirms it instantly.

Is something on this profile wrong or out of date?

Answers grounded in company sources

AI can make mistakes. Check sources and confirm requirements with the supplier.