Sourcing workspace
Profile updated 30 Oct 2026

Fresan Makina san. ve Tic. Ltd. Sti

Also known as Fresan

ManufacturerLocations reported in Türkiyefresanpresses.com
AI visibility scorecardHow much can an AI assistant tell a buyer about Fresan Makina san. ve Tic. Ltd. Sti?We scored this profile on the 8 questions buyers’ AI agents ask first, and ranked it against similar suppliers nearby.See the score

About

Fresan designs and manufactures mechanical and hydraulic presses for metal forming industries worldwide.

Founded in 1974, Fresan is a family-owned manufacturer of eccentric and hydraulic presses for metal forming industries. It exports more than 95% of its presses worldwide.

Products

16 listed
10 Ton Eccentric Press – FP 10P

10 Ton Eccentric Press – FP 10P

A 10-ton eccentric press with direct flywheel drive, up to 200 strokes per minute, 0–40 mm stroke adjustment, AC inverter speed control, a built-in auxiliary cam, and a 320 × 490 mm table.

Source & evidence

Supplier website
The FP 10P is our smallest and fastest eccentric press, rated at 10 tons. Direct flywheel drive delivers up to 200 strokes per minute, making it well suited to high-volume, light-tonnage parts. With a 0 - 40 mm stroke adjustment range, an AC inverter for speed control, and a built-in auxiliary cam, it's ready to run with servo or pneumatic sheet feeders straight out of the box. Despite its compact tonnage, its 320 x 490 mm table offers generous room for die mounting.
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

40 Ton Eccentric Press – FP 40P

40 Ton Eccentric Press – FP 40P

Flywheel-driven press rated at 40 tons, with a 0–84 mm stroke range, 125 strokes per minute in continuous operation, and a 450 × 650 mm table.

Source & evidence

Supplier website
The FP 40P is the largest and most powerful of our flywheel-driven presses, rated at 40 tons. Its 0 - 84 mm stroke range is noticeably deeper than the smaller flywheel models, opening up more forming work, while running at 125 strokes per minute in continuous operation. This is the first tonnage in the range to include pneumatic counterbalance cylinders as standard. Its 450 x 650 mm table comfortably accommodates mid-to-large dies.
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

FHP series

FHP series

C-frame hydraulic presses for sheet metal forming applications from 60 to 150 tons; an optional hydraulic die cushion supports deep drawing.

Source & evidence

Supplier website
The FHP series is a C-frame hydraulic press capable of a wide variety of sheet metal forming applications from 60 to 150 tons. The open front gives three-sided access to the die area for fast tool changes and part handling, while the rigid frame construction keeps deflection low under full load. An optional hydraulic die cushion can be added for deep drawing applications.
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

Hydraulic Deep Drawing Presses (H-Frame): 100–1000 Ton

Hydraulic Deep Drawing Presses (H-Frame): 100–1000 Ton

H-frame presses for deep drawing sheet metal, engineered to order from 100 to 1000 tons and built to customer-requested dimensions.

Source & evidence

Supplier website
Fresan H-frame presses shape sheet metal of varying thickness and grades - steel, stainless steel and alloys - under high pressure between male and female dies. The twin-column H-frame carries the drawing force symmetrically through both uprights, keeping deflection low and blank-holder pressure even across large dies. Every press is engineered to order, from 100 to 1000 tons, built to each customer's requested dimensions.
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

30 Ton Eccentric Press – FP 30P

30 Ton Eccentric Press – FP 30P

Flywheel-driven eccentric press rated at 30 tons, with 140 strokes per minute, a 0–60 mm stroke range, and a 400 × 600 mm table.

Source & evidence

Supplier website
The FP 30P is the fourth of our five flywheel-driven models, rated at 30 tons. At 140 strokes per minute in continuous operation, it delivers strong throughput for mid-tonnage sheet metal work. Its 0 - 60 mm stroke range and 400 x 600 mm table allow for larger dies than the smaller models in the range.
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

20 Ton Eccentric Press – FP 20P

20 Ton Eccentric Press – FP 20P

20-ton flywheel-driven eccentric press with a speed of 160 strokes per minute, a 0–50 mm stroke range and a 360 x 550 mm table.

Source & evidence

Supplier website
The FP 20P sits third in our five-model flywheel-driven range, rated at 20 tons. Its continuous-operation speed steps down slightly from the smaller models, to 160 strokes per minute, with a 0 - 50 mm stroke range and a 360 x 550 mm table.
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

60 Ton Eccentric Press – FP 60P

60 Ton Eccentric Press – FP 60P

A 60-ton back-geared eccentric press operating at 65 strokes per minute, with a 0–100 mm stroke range and a 500 x 700 mm table.

Source & evidence

Supplier website
The FP 60P is the entry point to our back-geared range, rated at 60 tons. Higher tonnage is achieved through the gear-reduction drive, but the ram retains the same 4-slide design used across our flywheel models. Running at 65 strokes per minute in continuous operation, with a 0 - 100 mm stroke range, it's well matched to demanding mid-tonnage work. Its 500 x 700 mm table suits larger dies than the flywheel range below it.
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

Back-Geared Eccentric Presses

Back-Geared Eccentric Presses

60–250 ton presses with a gear reduction between the flywheel and eccentric shaft, providing a slower, higher-force stroke.

Source & evidence

Supplier website
From 60 tons up, a gear reduction sits between the flywheel and the eccentric shaft. The back-geared drive trades speed for torque, delivering the slower, higher-force stroke that heavier blanking, forming, and shallow drawing work demands.
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

C-Frame Hydraulic Presses

C-Frame Hydraulic Presses

Designed for sheet metal forming; with a die cushion, the series can also perform light-to-medium tonnage deep drawing.

Source & evidence

Supplier website
C-frame hydraulic presses, designed for a wide variety of sheet metal forming applications. With the addition of the die cushion, this series can also perform light-to-medium tonnage deep drawing.
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

Deep Drawing Presses (H-Frame)

Deep Drawing Presses (H-Frame)

H-frame presses for forming and deep drawing, built to order with customer-specific table size, daylight, and stroke.

Source & evidence

Supplier website
Rigid frame construction and ram guidance for high stability under heavy loads. Engineered for a wide variety of forming applications and deep drawing. Manufactured per order, according to customer requirements with custom table size, daylight, stroke...
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

Flywheel Eccentric Presses

Flywheel Eccentric Presses

10–40 ton direct-drive presses that cycle at 125 to 200 strokes per minute, depending on model.

Source & evidence

Supplier website
The flywheel series runs on direct drive: the motor spins the flywheel, and the pneumatic clutch transfers that stored energy straight to the eccentric shaft. With no gear reduction in the drivetrain, these are the fastest presses in the line, cycling at 125 to 200 strokes per minute depending on model.
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

Eccentric Presses

Eccentric Presses

C-Frame eccentric presses built from 10 to 250 tons in flywheel and back-geared models.

Source & evidence

Supplier website
For more than 40 years, Fresan has designed and manufactured the C-Frame Eccentric Press - our flagship line, exported across Europe since the 1980s and built from 10 to 250 tons across flywheel and back-geared models.
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

Product categories

Locations & websites

2 locations · 1 website

Bursa, Türkiye

Küçükbalıklı Mh. Muhittin Kırcal Sk. No:3

Bursa, Türkiye

Source & evidence

Supplier website
"telephone":"+90 (224) 2155252","address":{"@type":"PostalAddress","streetAddress":"Küçükbalıklı Mh. Muhittin Kırcal Sk. No:3","addressLocality":"Bursa","postalCode":"16090","addressCountry":"TR"}
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

Company websites

Key capabilities

CapabilityDocumented scopeSupporting source
Custom press configurationFresan configures eccentric presses to order and builds non-standard table sizes, daylight, or control setups to specification.
Source & evidence

Supplier website
Every Fresan eccentric press can be configured to order. The most common additions are coil handling and press feeding equipment (decoilers, straighteners, and pneumatic or servo feeders) that turn a single press into a coil-fed line, plus upper and lower ejectors for automated part removal. For non-standard table sizes, Daylight, or control setups, Fresan engineers build to specification.
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

Custom press engineeringPresses are custom-engineered to the client's application, with tailor-made table size, daylight, stroke, and cushion capacity.
Source & evidence

Supplier website
Every press is custom-engineered to the client's application, with tailor-made table size, daylight, stroke, and cushion capacity.
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

Installation guidance and after-sales supportInstallation guidance and after-sales support from the team that engineered the press.
Source & evidence

Supplier website
Installation guidance and after-sales support from the same team that engineered your press.
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

Certificates & patents

Standard compliance

CE marking

Source & evidence

Supplier website
Every Fresan press carries CE marking and is designed to meet the EU Machinery Directive (2006/42/EC), the Low Voltage Directive (2014/35/EU), and the EMC Directive (2014/30/EU)
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

Standard compliance

CE marked

Source & evidence

Supplier website
Like every Fresan press, the FP 10P is CE marked and built for years of continuous production use.
Fresan Makina san. ve Tic. Ltd. Sti website
Checked 30 Oct 2026

Evidence & freshness

Every claim keeps its source. Company-reported information and independent verification are labelled separately. Spot something wrong? .

What to confirm

A starting point for your supplier conversation.

Manufacturing processesNo source confirms this yet
Services and capabilitiesNo source confirms this yet
CertificationsNo source confirms this yet
Order quantity & lead timeConfirm directly with the supplier

Get in touch

Company contactfresan@fresanpresses.com
Contact sources

EuroBLECH 2026 exhibitor directory · 22 Oct 2026

Elsewhere online

LinkedIn

youtube

Business type

AI interpretation; these are estimates, not verification.

Manufacturer · 98%
Source & evidence

AI-inferred
Based only on `company`, does this company manufacture its own products (it produces them itself or in its own/controlled factories)?

Is this your company?

Manage products, locations and the facts buyers and agents can retrieve.

Claim this profile Free. A work email on the company’s domain confirms it instantly.

Is something on this profile wrong or out of date?

Answers grounded in company sources

AI can make mistakes. Check sources and confirm requirements with the supplier.