Sourcing workspace
Profile updated 24 Oct 2026

Lingva S

Also known as Lingva-S · Lingva S d.o.o.

Contract manufacturerLocations reported in Slovenialingva-s.si
AI visibility scorecardHow much can an AI assistant tell a buyer about Lingva S?We scored this profile on the 8 questions buyers’ AI agents ask first, and ranked it against similar suppliers nearby.See the score

About

The company describes its website as welcoming visitors to the world of laser cut stencils.

Podjetje izdeluje več kot 4000 SMD šablon mesečno za več kot 400 kupcev po svetu.

Products

16 listed
VectorGuardTM systems

VectorGuardTM systems

VectorGuard stencils and mounting systems are manufactured in several frame and stencil sizes and are available in standard and FineGrain material.

Source & evidence

Supplier website
Since 2012, we have been authorized to manufacture VectorGuard stencils and mounting systems. The following frame and stencil sizes are available: 23×23 inch ( 584x584mm) 23×29 inch ( 584x736mm) 29×29 inch (736x736mm) VectorGuard stencils are available with both standard and FineGrain material.
Lingva S website
Checked 24 Oct 2026

Prototype stencils

Prototype stencils

Prototype stencils are available in different dimensions and intended for manual application of solder paste on a printed circuit board.

Source & evidence

Supplier website
Different dimensions available. Prototype stencils are intended for manual application of solder paste on a printed circuit board.
Lingva S website
Checked 24 Oct 2026

Multi-level SMD stencils

Multi-level SMD stencils

Stencils with different solder-paste coating thicknesses on a single stencil; thickness combinations range from 80 to 300 μm.

Source & evidence

Supplier website
Multi-level stencils are used for applications which require different thicknesses of solder paste coatings on a single stencil. This ensures the quantity control of solder paste for each component separately and helps achieve optimal application of solder paste to the printed circuit board. General information: The thinnest part 80 μm thick The thickest part 300 um thick Possible combination of different thicknesses on one stencil from 80 to 300 um.
Lingva S website
Checked 24 Oct 2026

XXL šablone

XXL šablone

Šablone velikega formata, vpete v aluminijaste okvirje; na voljo so navedene velikosti in druge dimenzije po dogovoru.

Source & evidence

Supplier website
Šablone velikega formata vpete v aluminijaste okvirje. Na razpolago so naslednje velikosti: 584 x 1200 mm 584 x 1800 mm 736 x 980 mm 736 x 1500 mm 736 x 1800 mm Različne dimenzije po dogovoru.
Lingva S website
Checked 24 Oct 2026

Stencils mounted in a standard size aluminum frame

Stencils mounted in a standard size aluminum frame

Available frame sizes are 400 × 500 mm, 500 × 500 mm, 555 × 555 mm, 550 × 650 mm, 584 × 584 mm, and 736 × 736 mm.

Source & evidence

Supplier website
The following sizes are available: 400 x 500 mm 500 x 500 mm 555 x 555 mm 550 x 650 mm 584 x 584 mm 736 x 736 mm
Lingva S website
Checked 24 Oct 2026

VectorGuard™ sistemi

VectorGuard™ sistemi

VectorGuard šablone in vpenjalni sistemi so na voljo v več velikostih, s standardnim ali FineGrain materialom.

Source & evidence

Supplier website
Na voljo so naslednje velikosti okvirjev in šablon: 23×23 inch ( 584x584mm) 23×29 inch ( 584x736mm) 29×29 inch (736x736mm) VG šablone so na voljo tako z standardnim kot z FineGrain materialom.
Lingva S website
Checked 24 Oct 2026

Stencils for pneumatic frames

Stencils for pneumatic frames

Stencils are produced for pneumatic frames including Zelflex, Quattro flex, DEK, Alpha, and Mechatronic.

Source & evidence

Supplier website
We produce stencils for pneumatic frames: Zelflex, Quattro flex, DEK, Alpha, Mechatronic, etc.
Lingva S website
Checked 24 Oct 2026

XXL Alu frame stencils

XXL Alu frame stencils

Large-format stencils mounted on aluminum frames, with listed sizes from 584 × 1200 mm to 736 × 1800 mm.

Source & evidence

Supplier website
Large format stencils mounted on aluminum frames. The following sizes are available: 584 x 1200 mm 584 x 1800 mm 736 x 980 mm 736 x 1500 mm 736 x 1800 mm Different dimensions available by arrangement.
Lingva S website
Checked 24 Oct 2026

Večnivojske SMD šablone

Večnivojske SMD šablone

Uporabljajo se za aplikacije, ki potrebujejo različne debeline nanosov spajkalne paste na eni šabloni.

Source & evidence

Supplier website
Večnivojske šablone se uporabljajo za tiste aplikacije, ki potrebujejo različne debeline nanosov spajkalne paste na eni šabloni.
Lingva S website
Checked 24 Oct 2026

Prototipne šablone

Prototipne šablone

Namenjene so ročnemu nanosu spajkalne paste na tiskano vezje.

Source & evidence

Supplier website
Prototipne šablone so namenjene ročnemu nanosu spajkalne paste na tiskano vezje.
Lingva S website
Checked 24 Oct 2026

SMD šablone

Izdeluje SMD šablone; navedena proizvodnja presega 4000 kosov mesečno.

Source & evidence

Supplier website
Trenutno v našemu podjetju izdelamo preko 4000 SMD šablon mesečno
Lingva S website
Checked 24 Oct 2026

SMD stencils

Lingva S produces over 4,000 SMD stencils per month.

Source & evidence

Supplier website
We currently produce over 4000 SMD stencils per month for more than 400 customers worldwide.
Lingva S website
Checked 24 Oct 2026

SMD šablon

Laser-cut SMD stencils manufactured by the company.

Source & evidence

Supplier website
Podjetje Lingva S je specializirano za proizvodnjo lasersko rezanih SMD šablon od leta 2004
Lingva S website
Checked 24 Oct 2026

Product categories

Locations & websites

2 locations · 1 website

Lingva S d.o.o.

Podskrajnik 35b, 1380 Cerknica, Slovenia

Cerknica, Slovenia

Source & evidence

Supplier website
Lingva S d.o.o. Podskrajnik 35b, 1380 Cerknica, Slovenia tel: +386 1709 46 63 Mob: +386 31 621 265 Mail: gregor@lingva-s.si Mail: info@lingva-s.si
Lingva S website
Checked 24 Oct 2026

Supplier website
Lingva S d.o.o. Podskrajnik 35b, 1380 Cerknica, Slovenija tel: +386 1709 46 63 Mob: +386 31 621 265 Mail: gregor@lingva-s.si Mail: info@lingva-s.si
Lingva S website
Checked 24 Oct 2026

Supplier website
Lingva S d.o.o. Podskrajnik 35b, 1380 Cerknica, Slovenia Tel: +386 1709 46 63 Mob: +386 31 621 265 Mail: gregor@lingva-s.si Mail: info@lingva-s.si
Lingva S website
Checked 24 Oct 2026

Supplier website
Lingva S d.o.o. Podskrajnik 35b, 1380 Cerknica, Slovenia tel: +386 1709 46 63 Mob: +386 31 621 265 Mail: gregor@lingva-s.si Mail: info@lingva-s.si
Lingva S website
Checked 24 Oct 2026

Supplier website
Lingva S d.o.o., Podskrajnik 35b, 1380 Cerknica, Slovenija Tel: +386 1709 46 63 Mob: +386 31 621 265 Mail: gregor@lingva-s.si Mail: info@lingva-s.si
Lingva S website
Checked 24 Oct 2026

Supplier website
Lingva S d.o.o., Podskrajnik 35b, 1380 Cerknica, Slovenija Tel: +386 1709 46 63 Mob: +386 31 621 265 Mail: gregor@lingva-s.si Mail: info@lingva-s.si
Lingva S website
Checked 24 Oct 2026

Supplier website
Lingva S d.o.o. Podskrajnik 35b, 1380 Cerknica, Slowenien Tel: +386 1709 46 63 Mob: +386 31 621 265 Mail: gregor@lingva-s.si Mail: info@lingva-s.si
Lingva S website
Checked 24 Oct 2026

Supplier website
Lingva S d.o.o. Podskrajnik 35b, 1380 Cerknica, Slovenija tel: +386 1709 46 63 Mob: +386 31 621 265 Mail: gregor@lingva-s.si Mail: info@lingva-s.si
Lingva S website
Checked 24 Oct 2026

Supplier website
Lingva S d.o.o. Podskrajnik 35b, 1380 Cerknica, Slovenija tel: +386 1709 46 63 Mob: +386 31 621 265 Mail: gregor@lingva-s.si Mail: info@lingva-s.si
Lingva S website
Checked 24 Oct 2026

Supplier website
Lingva S d.o.o. Podskrajnik 35b, 1380 Cerknica, Slovenia tel: +386 1709 46 63 Mob: +386 31 621 265 Mail: gregor@lingva-s.si Mail: info@lingva-s.si
Lingva S website
Checked 24 Oct 2026

Company websites

Key capabilities

CapabilityDocumented scopeSupporting source
NANO coatingNanoClear coating supports more accurate solder paste application, increases efficiency, and reduces the cleaning interval.
Source & evidence

Supplier website
The use of NanoClear coating enables better and more accurate application of solder paste, increases efficiency and reduces the cleaning interval; all together it leads to a reduction in production costs.
Lingva S website
Checked 24 Oct 2026

NANO premazNanoClear premaz omogoča boljše in natančnejše nanašanje spajkalne paste, poveča učinkovitost in zmanjša interval čiščenja.
Source & evidence

Supplier website
Uporaba NanoClear premaza omogoča boljše in natančnejše nanašanje spajkalne paste, poveča učinkovitost ter zmanjša interval čiščenja; vse skupaj vodi v zmanjšanje proizvodnih stroškov.
Lingva S website
Checked 24 Oct 2026

Hitra dostavaThe page states that delivery is available within 24 hours; orders placed by 10 a.m. are processed within 24 hours.
Source & evidence

Supplier website
Hitra dostava Dostava v 24 urah Pogoj za 24 urno dostavo: Naročila oddana do 10ih dopoldan bodo obdelana v 24 urah.
Lingva S website
Checked 24 Oct 2026

Zaščita robovPreprečuje poškodbe zaradi ostrih robov in poškodbe zaščitne embalaže ter izboljša stabilnost SMD šablon.
Source & evidence

Supplier website
Z zaščito robov preprečimo možnost poškodb zaradi ostrih robov in poškodbe zaščitne embalaže. Hkrati dosežemo tudi boljšo stabilnost SMD šablon.
Lingva S website
Checked 24 Oct 2026

ElectropolishingRemoves irregularities inside the aperture and from the stencil surface, producing a smooth surface.
Source & evidence

Supplier website
Electropolishing is a process in which irregularities resulting from imperfections in the laser cutting are removed inside the aperature and from the surface itself. The result is a smooth surface, which enables more efficient application of solder paste, and also improves the mechanical properties and duration of the stencil.
Lingva S website
Checked 24 Oct 2026

Mechanical polishingPolishes both sides of the stencil to remove surface irregularities and create a smooth surface.
Source & evidence

Supplier website
The Ottomat 2 polishing machine from Otto Dilg GmbH allows us to polish and remove irregularities on the surface of the stencil on both sides. The result is a smooth surface that allows customers to fully transfer the solder paste to the surface of the printed circuit board.
Lingva S website
Checked 24 Oct 2026

ElektropoliranjePostopek odstrani nepravilnosti, ki nastanejo pri laserskem rezanju, in ustvari gladko površino.
Source & evidence

Supplier website
Elektropoliranje je postopek, pri katerem se znotraj aparatur in s same površine odstranijo nepravilnosti, ki so posledica nepopolnosti pri samem laserskem rezanju. Rezultat je gladka površina
Lingva S website
Checked 24 Oct 2026

Mehansko poliranjeDvostransko poliranje in odstranjevanje nepravilnosti na površini šablone.
Source & evidence

Supplier website
Polirni stroj Ottomat 2 proizvajalca Otto Dilg GmbH nam omogoča dvostransko poliranje in odstranjevanje nepravilnosti na površju šablone.
Lingva S website
Checked 24 Oct 2026

Edge protectionProtects stencil edges from damage and improves stencil stability.
Source & evidence

Supplier website
By protecting the edges, we prevent the possibility of damage due to sharp edges and damage of the protective packaging. At the same time, we also achieve better stability of SMD stencils.
Lingva S website
Checked 24 Oct 2026

Technological consultingThe company lists technological consulting among its strengths.
Source & evidence

Supplier website
Odlikuje nas: Najnovejša tehnologija Izkušnje in tehnološko svetovanje Podpora strankam Hitra dostava
Lingva S website
Checked 24 Oct 2026

Express deliveryDelivery within 24 hours is offered for orders placed by 10am.
Source & evidence

Supplier website
Express delivery Delivery within 24 hours Condition for 24 hour delivery: Orders placed by 10am will be processed within 24 hours.
Lingva S website
Checked 24 Oct 2026

Customer supportThe company lists customer support among its strengths.
Source & evidence

Supplier website
Odlikuje nas: Najnovejša tehnologija Izkušnje in tehnološko svetovanje Podpora strankam Hitra dostava
Lingva S website
Checked 24 Oct 2026

Fast deliveryThe company lists fast delivery among its strengths.
Source & evidence

Supplier website
Odlikuje nas: Najnovejša tehnologija Izkušnje in tehnološko svetovanje Podpora strankam Hitra dostava
Lingva S website
Checked 24 Oct 2026

Izdelava šablon za vpenjalne okvirjeIzdelujejo šablone za vse vrste vpenjalnih okvirjev.
Source & evidence

Supplier website
Izdelujemo šablone za vse vrste vpenjalnih okvirjev: Zelflex, Quattro flex, DEK, Alpha, Mechatronic, etc.
Lingva S website
Checked 24 Oct 2026

Printed & flexible electronicsListed capability; detailed scope not provided.
Source & evidence

Trade-fair listing
EMS electronic manufacturing services > EMS (component / chip carrier manufacturing) > Screen production services
electronica 2026 exhibitor directory
Checked 26 Sept 2026

Laser processingListed capability; detailed scope not provided.
Source & evidence

Trade-fair listing
EMS electronic manufacturing services > EMS (component / chip carrier manufacturing) > Laser engraving
electronica 2026 exhibitor directory
Checked 26 Sept 2026

PCB fabricationListed capability; detailed scope not provided.
Source & evidence

Trade-fair listing
EMS electronic manufacturing services > EMS (component construction and equipment manufacturing) > Solder mask services
electronica 2026 exhibitor directory
Checked 26 Sept 2026

PrototypingListed capability; detailed scope not provided.
Source & evidence

Trade-fair listing
EMS electronic manufacturing services > Prototyping > PCBs
electronica 2026 exhibitor directory
Checked 26 Sept 2026

Company updates

Activities for individual participation at Electronica 2024

The operation concerned individual participation at the Electronica 2024 international fair in Munich and was selected for co-financing under a public tender.

Source & evidence

Supplier website
Potem naziv operacije: Aktivnosti za izvedbo individualnega nastopa na mednarodnem sejmu Electronica 2024, s terminom sejma od 12.11.2024 do 15.11.2024 MESSE MÜNCHEN GMBH, Nemčija Operacija je bila za sofinanciranje izbrana na Javnem razpisu za sofinanciranje individualnih nastopov podjetij na mednarodnih sejmih v letih 2024-2028.
Lingva S website
Checked 24 Oct 2026

productronica 2025

The company invited visitors to Hall B3, Booth 562.

Source & evidence

Supplier website
productronica 2025 November 18 – 21 Visit us at Hall B3, Booth 562
Lingva S website
Checked 24 Oct 2026

Evidence & freshness

Every claim keeps its source. Company-reported information and independent verification are labelled separately. Spot something wrong? .

  • Lingva S websiteSupplier websiteChecked 24 Oct 2026

    Supports 9 facts: Company name · Description · XXL šablone · VectorGuard™ sistemi · Večnivojske SMD šablone · Prototipne šablone · Šablone vpete v aluminijast okvir standardnih velikosti · Izdelava šablon za vpenjalne okvirje

    1 more

    Location: Cerknica, Slovenia

  • electronica 2026 exhibitor directoryTrade-fair listingChecked 26 Sept 2026

    Supports 9 facts: Company name · Description · Printed & flexible electronics · Laser processing · PCB fabrication · Prototyping · Printed circuit boards · HDI PCBs

    1 more

    Location: Cerknica, Slovenia

  • Lingva S websiteSupplier websiteChecked 24 Oct 2026

    Supports 8 facts: Company name · VectorGuardTM systems · Prototype stencils · Multi-level SMD stencils · Stencils mounted in a standard size aluminum frame · Stencils for pneumatic frames · XXL Alu frame stencils · Location: Cerknica, Slovenia

  • Lingva S websiteSupplier websiteChecked 24 Oct 2026

    Supports 8 facts: Company name · Description · SMD šablon · Technological consulting · Customer support · Fast delivery · Location: Cerknica, Slovenia · News: Activities for individual participation at Electronica 2024

  • Lingva S websiteSupplier websiteChecked 24 Oct 2026

    Supports 8 facts: Company name · Description · SMD stencils · NANO coating · Electropolishing · Mechanical polishing · Edge protection · Location: Cerknica, Slovenia

  • Lingva S websiteSupplier websiteChecked 24 Oct 2026

    Supports 8 facts: Company name · Description · SMD šablone · NANO premaz · Zaščita robov · Elektropoliranje · Mehansko poliranje · Location: Cerknica, Slovenia

  • Lingva S websiteSupplier websiteChecked 24 Oct 2026

    Supports 5 facts: Company name · Description · Express delivery · Location: Cerknica, Slovenia · News: productronica 2025

  • Lingva S websiteSupplier websiteChecked 24 Oct 2026

    Supports 4 facts: Company name · Description · Hitra dostava · Location: Cerknica, Slovenia

  • Lingva S websiteSupplier websiteChecked 24 Oct 2026

    Supports 3 facts: Company name · Description · Location: Cerknica, Slovenia

  • Lingva S websiteSupplier websiteChecked 24 Oct 2026

    Supports 3 facts: Company name · Description · Location: Cerknica, Slovenia

  • Lingva S websiteSupplier websiteChecked 24 Oct 2026

    Supports 3 facts: Company name · Description · Location: Cerknica, Slovenia

  • Lingva S websiteSupplier websiteChecked 24 Oct 2026

    Supports 2 facts: Company name · Description

  • Lingva S websiteSupplier websiteChecked 24 Oct 2026

    Supports 2 facts: Company name · Description

What to confirm

A starting point for your supplier conversation.

CertificationsNo source confirms this yet
Order quantity & lead timeConfirm directly with the supplier

Get in touch

Company contact+386 1 7094663
Contact sources

electronica 2026 exhibitor directory · 26 Sept 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Company contactgregor@lingva-s.si
Contact sources

electronica 2026 exhibitor directory · 26 Sept 2026

Company contactinfo@lingva-s.si
Contact sources

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Company contact+386 31 621 265
Contact sources

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Lingva S website · 24 Oct 2026

Business type

AI interpretation; these are estimates, not verification.

Contract manufacturer · 88%
Source & evidence

AI-inferred
Based only on `company`, does this company manufacture or assemble products for other companies as a service (EMS, contract manufacturing, OEM/ODM production, PCB assembly for customers)?

Manufacturer · 74%
Source & evidence

AI-inferred
Based only on `company`, does this company manufacture its own products (it produces them itself or in its own/controlled factories)?

Machine shop / parts job shop · 40%
Source & evidence

AI-inferred
Based only on `company`, does this company machine or fabricate parts to customers' drawings (CNC machining, turning, sheet-metal job shop)?

PCB fabricator · 28%
Source & evidence

AI-inferred
Based only on `company`, does this company fabricate bare printed circuit boards (PCB fabrication, not assembly)?

Is this your company?

Manage products, locations and the facts buyers and agents can retrieve.

Claim this profile Free. A work email on the company’s domain confirms it instantly.

Is something on this profile wrong or out of date?

Answers grounded in company sources

AI can make mistakes. Check sources and confirm requirements with the supplier.