
Powder Cores
Magnetic core products.
Source & evidence
Supplier website
Powder Cores
Magnetics website
Checked 19 Oct 2026
Also known as Magnetics® · Magnetics, Division of Spang & Co.
Supplier of soft magnetic components and materials to the electronics industry.
Magnetics specializes in research, design and production of powder cores, ferrite cores and tape wound cores for electronics applications.

Magnetic core products.
Supplier website
Powder Cores
Magnetics website
Checked 19 Oct 2026

Magnetic core products.
Supplier website
Ferrite Cores
Magnetics website
Checked 19 Oct 2026

Magnetic core products.
Supplier website
Tape Wound Cores
Magnetics website
Checked 19 Oct 2026
Powder core material identified as molypermalloy and described as having low core losses, highest Q, and high temperature stability compared with other materials.
Supplier website
MPP (molypermalloy)
Magnetics website
Checked 19 Oct 2026
Powder core material described as offering the highest DC bias, best temperature stability, and approximately 40% lower losses than High Flux.
Supplier website
For the most efficient design using the smallest core, Edge is the best choice, offering the highest DC bias, best temperature stability, and approximately 40% lower losses compared to High Flux.
Magnetics website
Checked 19 Oct 2026
Powder core material with DC bias superior to Kool Mμ and comparable to Kool Mμ Hƒ; its core losses are almost 30% below Kool Mμ Hƒ.
Supplier website
Magnetics' lowest loss powder core material, Kool Mμ Ultra has DC bias superior to Kool Mμ and comparable to Kool Mμ Hƒ, with core losses almost 30% below Kool Mμ Hƒ.
Magnetics website
Checked 19 Oct 2026
Ferrite cores in multiple geometries for inductors, pulse transformers, high-frequency transformers, and noise filters.
Supplier website
Ferrites for high frequency power supply and high quality communication markets are produced in a variety of shapes and sizes for inductors, pulse transformers, high frequency transformers, and noise filters. Magnetics® offers ferrite cores in a variety of geometries which are categorized as Shapes; E, I, EFD, ETD, EER, EC, U, UR, Block, Planar E and I, and ER cores.
Magnetics website
Checked 19 Oct 2026
Cores used in current transformers and common mode chokes, with high permeability, high saturation, and low power loss.
Supplier website
These cores are commonly used in the applications of current transformers and common mode chokes, as they demonstrate high permeability, high saturation, and low power loss.
Magnetics website
Checked 19 Oct 2026
Ferrite toroids have no air gap and a uniform cross-sectional area. They are available in many sizes and materials.
Supplier website
Ferrite toroids offer high magnetic efficiency as there is no air gap and the cross-sectional area is uniform. Magnetics® toroids are available in many sizes (outside diameters ranging from 2mm to 140mm) and materials (permeabilities ranging from 750µ to 15,000µ).
Magnetics website
Checked 19 Oct 2026
Cores provide the high saturation of standard silicon-iron XFlux with a 20% improvement in core loss.
Supplier website
XFlux Ultra cores offer the same high saturation found in standard silicon-iron XFlux while providing a 20% improvement in core loss.
Magnetics website
Checked 19 Oct 2026
Cores described as a low-cost solution for applications requiring stable inductance under load.
Supplier website
The relatively high saturation flux density of 75-Series cores makes them a low-cost solution in applications where stable inductance under load is necessary.
Magnetics website
Checked 19 Oct 2026
Powder core material described as a lower-cost alternative to High Flux in some applications.
Supplier website
XFlux can be a lower cost alternative to High Flux, in situations where the higher core losses and more limited permeability availability of XFlux is acceptable.
Magnetics website
Checked 19 Oct 2026
Made from thin strips of high-permeability nickel-iron alloys or grain-oriented silicon iron.
Supplier website
Tape Wound cores and Bobbin cores are made from thin strips of high permeability nickel-iron alloys such as Square Orthonol®, Square Permalloy 80, Round Permalloy, Supermalloy, and 48 Alloy, or grain oriented silicon iron known as Magnesil®.
Magnetics website
Checked 19 Oct 2026
Powder core material described as suitable for high-efficiency, high-power inductors.
Supplier website
The combination of high DC bias and low core loss density makes Kool Mµ MAX the optimal solution for high efficiency, high power inductors.
Magnetics website
Checked 19 Oct 2026
Powder core material to consider for small core sizes in DC-bias-dominated designs.
Supplier website
For small core size in a DC bias dominated design, High Flux material should be considered.
Magnetics website
Checked 19 Oct 2026
Accessories include bobbins, printed circuit bobbins, clamps, mounts, and headers.
Supplier website
Hardware accessories such as bobbins, printed circuit bobbins, clamps, mounts and headers are also available.
Magnetics website
Checked 19 Oct 2026
Cut cores made from metallic glass materials with an amorphous atomic structure.
Supplier website
Created from metallic glass materials with an amorphous atomic structure, amorphous cut cores offer higher resistivity than nanocrystalline cores, as well as excellent efficiency and frequency response.
Magnetics website
Checked 19 Oct 2026
Cores combining low core loss and high permeability with thermal stability.
Supplier website
Magnetics nanocrystalline cores combine low core loss and high permeability with the thermal stability needed for compact, high-performance designs.
Magnetics website
Checked 19 Oct 2026
Powder core material optimized for frequencies of 200–500 kHz.
Supplier website
Kool Mµ Hƒ powder cores, optimized for frequencies 200-500 kHz, are a cost-effective solution for minimizing power losses in high frequency power supplies.
Magnetics website
Checked 19 Oct 2026
Powder core material commonly referred to as sendust.
Supplier website
Magnetics® is a manufacturer of high quality powder core materials including Kool Mu® (sendust)
Magnetics website
Checked 19 Oct 2026
Powder core product family.
Supplier website
Powder Cores Kool Mu Cores Kool Mu Material Curves
Magnetics website
Checked 19 Oct 2026
Powder core product family.
Supplier website
Kool Mu Ultra Cores Kool Mu Ultra Material Curves
Magnetics website
Checked 19 Oct 2026
Powder core product family.
Supplier website
Kool Mu MAX Cores Kool Mu MAX Material Curves
Magnetics website
Checked 19 Oct 2026
Powder core product family.
Supplier website
Kool Mu HF Cores Kool Mu HF Material Curves
Magnetics website
Checked 19 Oct 2026
Powder core product family.
Supplier website
XFlux Cores XFLUX Material Curves
Magnetics website
Checked 19 Oct 2026
Powder core product family.
Supplier website
XFlux Ultra Cores XFLUX Ultra Material Curves
Magnetics website
Checked 19 Oct 2026
Powder core product family.
Supplier website
MPP Cores MPP Material Curves
Magnetics website
Checked 19 Oct 2026
Powder core product family.
Supplier website
Edge Cores Edge Material Curves
Magnetics website
Checked 19 Oct 2026
Powder core product family.
Supplier website
High Flux Cores High Flux Material Curves
Magnetics website
Checked 19 Oct 2026
Trade-fair listing
Passive components > Inductors and accessories > Inductor cores, pressed cores
electronica 2026 exhibitor directory
Checked 26 Sept 2026
Trade-fair listing
Passive components > Magnetic and ceramic products > Soft-ferrite products
electronica 2026 exhibitor directory
Checked 26 Sept 2026
1 of 5 locations have no address precise enough to place; switch to List to see them.
| Capability | Documented scope | Supporting source |
|---|---|---|
| Technical Documents | A library of technical documents for powder, ferrite and tape wound cores, including datasheets, application notes and selection guides. | Source & evidenceSupplier website |
| Design Tools | Free tools to optimize Magnetics components for specific applications, with options to save, export and compare designs. | Source & evidenceSupplier website |
| Nanocrystalline engineering support and custom solutions | Rapid sampling, low minimum order quantities, and engineering support for standard and custom solutions. | Source & evidenceSupplier website |
| Advanced Part Number Finder | A tool to find magnetic cores by shape, size, material and performance. | Source & evidenceSupplier website |
Trade-fair listing
Electro-Mobility (E)
electronica 2026 exhibitor directory
Checked 26 Sept 2026
Trade-fair listing
Power Electronics and Energy Technology (PE)
electronica 2026 exhibitor directory
Checked 26 Sept 2026
Supplier website
Magnetics’ newest plant is a 71,000 square foot (6,600 square meters), ISO 9001:2008 and TS 16949:2009 certified manufacturing facility
Magnetics website
Checked 19 Oct 2026
Supplier website
Magnetics’ newest plant is a 71,000 square foot (6,600 square meters), ISO 9001:2008 and TS 16949:2009 certified manufacturing facility
Magnetics website
Checked 19 Oct 2026
Magnetics Acquires Magnetic Metals
Supplier website
9.1.26 | Magnetics Acquires Magnetic Metals [Publication date evidence: 9.1.26 | Magnetics Acquires Magnetic Metals]
Magnetics website
Checked 19 Oct 2026
New Shapes Available in Kool Mµ Ultra!
Supplier website
6.2.25 | New Shapes Available in Kool Mµ Ultra! [Publication date evidence: 6.2.25 | New Shapes Available in Kool Mµ Ultra!]
Magnetics website
Checked 19 Oct 2026
New Shapes Available in XFlux® Ultra!
Supplier website
12.18.24 | New Shapes Available in XFlux® Ultra! [Publication date evidence: 12.18.24 | New Shapes Available in XFlux® Ultra!]
Magnetics website
Checked 19 Oct 2026
Every claim keeps its source. Company-reported information and independent verification are labelled separately. Spot something wrong? .
Supports 20 facts: Company name · Description · Powder Cores · Ferrite Cores · Tape Wound Cores · Kool Mu Cores · Kool Mu Ultra Cores · Kool Mu MAX Cores
Kool Mu HF Cores · XFlux Cores · XFlux Ultra Cores · MPP Cores · Edge Cores · High Flux Cores · Technical Documents · Design Tools · Advanced Part Number Finder · News: Magnetics Acquires Magnetic Metals · News: New Shapes Available in Kool Mµ Ultra! · News: New Shapes Available in XFlux® Ultra!
Supports 12 facts: Company name · Description · MPP · Edge® · Kool Mµ® Ultra · XFlux® Ultra · 75-Series cores · XFlux®
Kool Mµ® MAX · High Flux · Kool Mu® Hƒ · Kool Mu®
Supports 7 facts: Company name · ISO 9001:2008 · TS 16949:2009 · Location: Pittsburgh, United States · Location: Kowloon, Hong Kong SAR China · Location: Xiamen, China · Location: Phoenix, United States
Supports 7 facts: Company name · Description · Inductors & chokes · Magnetic & ceramic components · E-mobility · Power electronics & energy · Location: PA 15238, United States
Supports 5 facts: Company name · Description · Nanocrystalline · Bobbin cores · Amorphous
Supports 3 facts: Company name · Location: Pittsburgh, United States · Location: Kowloon, Hong Kong SAR China
Supports 3 facts: Company name · Description · Hardware accessories
Supports 3 facts: Company name · Nanocrystalline Cores · Nanocrystalline engineering support and custom solutions
Supports 2 facts: Company name · Ferrite Toroids
Supports 2 facts: Company name · Ferrite Shapes
Supports 1 fact: Company name
Supports 1 fact: Company name
Supports 1 fact: Company name
A starting point for your supplier conversation.
electronica 2026 exhibitor directory · 26 Sept 2026
Magnetics website · 19 Oct 2026
Magnetics website · 19 Oct 2026
electronica 2026 exhibitor directory · 26 Sept 2026
Magnetics website · 19 Oct 2026
Magnetics website · 19 Oct 2026
Magnetics website · 19 Oct 2026
Magnetics website · 19 Oct 2026
Magnetics website · 19 Oct 2026
AI interpretation; these are estimates, not verification.
AI-inferred
Based only on `company`, does this company manufacture its own products (it produces them itself or in its own/controlled factories)?
AI-inferred
Based only on `company`, does this company offer engineering or product-design services for customers' products (hardware, firmware, PCB layout, product development)?
Manage products, locations and the facts buyers and agents can retrieve.
Claim this profile Free. A work email on the company’s domain confirms it instantly.Is something on this profile wrong or out of date?
AI can make mistakes. Check sources and confirm requirements with the supplier.