Sourcing workspace
Profile updated 19 Oct 2026

SAW COMPONENTS Dresden GmbH

Also known as SAW COMPONENTS GmbH · SAW COMPONENTS Dresden

ManufacturerLocations reported in Germanysawcomponents.de
AI visibility scorecardHow much can an AI assistant tell a buyer about SAW COMPONENTS Dresden GmbH?We scored this profile on the 8 questions buyers’ AI agents ask first, and ranked it against similar suppliers nearby.See the score

About

SAW COMPONENTS Dresden combines thin-film technologies, nanostructuring, packaging processes and sensor solutions.

The company states that its production is entirely in Germany and that it is completely independent.

Products

7 listed
SAW TEMP

SAW TEMP

Passive, battery-free temperature measurement from -180°C to 350°C, queried wirelessly by radio; suitable for fast-moving assemblies and harsh environments.

Source & evidence

Supplier website
SAW TEMP Passive, batterielose Temperaturmessung Von -180°C bis 350°C Drahtlose Abfrage über Funk Schnell bewegte Baugruppen Raue Umweltbedingungen
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

SAW IDENT

SAW IDENT

Passive RFID identification at distances up to 20 meters and temperatures up to 350°C; for harsh environments and high object speeds.

Source & evidence

Supplier website
SAW IDENT Passive RFID Kennzeichnung Über Entfernungen bis zu 20 Meter Bei Temperaturen bis zu 350°C Raue Umweltbedingungen Hohe Objektgeschwindigkeiten
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

SAW Filter

SAW Filter

Filters for wireless applications, manufactured in production runs from 30 MHz to 3 GHz and for transmit power up to 30 dBm.

Source & evidence

Supplier website
We manufacture SAW filters in complete production runs from 30 MHz to 3 GHz for up to 30 dBm transmit power and a wide range of wireless applications.
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

SAW sensors

SAW sensors

Wireless-readable sensors that operate without power consumption.

Source & evidence

Supplier website
SAW sensors Wireless readable sensors without power consumption
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

SAW resonators

SAW resonators

One-port and two-port resonators offered for use in all frequency ranges.

Source & evidence

Supplier website
We offer a wide range of 1-port and 2-port SAW resonators for use in all frequency ranges.
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

SAW Bauelemente

SAW Bauelemente

SAW Bauelemente für anspruchsvolle Anwendungen wie Luft- und Raumfahrt.

Source & evidence

Supplier website
SAW Bauelemente höchste Präzision und Zuverlässigkeit, beste Verarbeitungsqualität, Produktqualifizierung für anspruchsvolle Anwendungen wie Luft- und Raumfahrt
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Product categories

Locations & websites

1 location · 1 website

Dresden, Germany

Manfred-von-Ardenne-Ring 7, D-01099 Dresden, Germany

Dresden, Germany

Source & evidence

Supplier website
Company footer: Adress SAW COMPONENTS Dresden GmbH Manfred-von-Ardenne-Ring 7 D-01099 Dresden Germany Contact Telephone: +49-351-8872510 Telefax: +49-351-8872520 Email: support(at)sawcomponents.de
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Trade-fair listing
Germany
electronica 2026 exhibitor directory
Checked 26 Sept 2026

Trade-fair listing
electronica 2026 exhibitor directory
Checked 26 Sept 2026

Trade-fair listing
electronica 2026 exhibitor directory
Checked 26 Sept 2026

Company websites

Key capabilities

CapabilityDocumented scopeSupporting source
Contract manufacturing of customized chips and sensorsContract manufacturing for customized chips and sensors, including biosensors, micro-optical and photonic assemblies, SAW filters, resonators, delay lines and SAW sensor solutions.
Source & evidence

Supplier website
We are your contract manufacturer for customized chips and sensors, such as biosensors for point-of-care diagnostics, micro-optical and photonic assemblies, SAW filters, SAW resonators and SAW delay lines as well as innovative SAW sensor solutions for use in temperature measurement, force measurement, identification, biology and other measurement variables.
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Laser processingLaser processing of workpieces approximately 300 mm × 300 mm × 200 mm, with positioning and laser accuracy up to 25 µm; includes marking and cutting workpieces up to 500 µm thick.
Source & evidence

Supplier website
Laser processing Workpiece sizes of approx. 300mmx300mmx200mm can be processed Positioning and laser accuracy up to 25µm Markings of all kind Cutting of workpieces up to 500µm thickness
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Package sealing and weldingCapping, roll seam welding, and projection welding for components with edge lengths from 2 mm to 50 mm; projection welding is also available for round components.
Source & evidence

Supplier website
Capping Roll seam welding (Seam Welding) Welding of components with edge lengths of 2mm to 50mm Projection welding (Projection Welding) Sizes from 2mm to max. 36mm edge length, also round components (circumference max. 144mm)
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Microfluidic and covering with Dry Film ResistMulti-layer dry-resist structures on wafers for microfluidic systems and for covering cavities to protect active structures from contamination.
Source & evidence

Supplier website
multi-layer dry resist structures on the wafer for microfluidic systems and covering of cavities to protect active structures from contamination
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Measurement and monitoringProcess and critical-parameter monitoring, including electrical wafer tests according to agreed tolerances and minimum yields.
Source & evidence

Supplier website
We use various measuring devices to monitor and control processes and critical parameters: XRF for coating thickness measurement Probe section measuring device for layer thickness measurement on structured wafers AFM for surface and edge assessment Optical structure width measurement technology (i-line) down to 0.3µm (CD) Automatic wafer prober with NWA and HF probes Resistance measurement Ellipsometer for evaluation of semi-transparent layers We carry out electrical wafer tests according to agreed tolerances and minimum yields (random sampling or 100% measurement): HF measurement s-parameter measurement
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Mask data processingCreation of masks using customer data and digitization, processing, and checking of mask data before tape-out.
Source & evidence

Supplier website
Creation of masks with your customer data Digitization and processing of your mask data Data check before each tape out
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Customer-specific SAW resonator development and manufacturingDevelopment and manufacture of SAW resonators for customer requirements, for frequency ranges up to 3 GHz.
Source & evidence

Supplier website
We develop and manufacture SAW resonators for all frequency ranges up to 3 GHz according to customer requirements.
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Flexible technology platformAccess to wafer structuring, coating processes, analytics and packaging processes in a 1000m² clean room.
Source & evidence

Supplier website
In our 1000m² clean room you will find a wide range of technologies that you can use flexibly for your own ideas. Be it wafer structuring, coating processes, analytics or a specific packaging process.
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Customer-specific SAW filter development and manufacturingDevelopment and manufacture of SAW filters for customer requirements, for frequency ranges up to 3 GHz.
Source & evidence

Supplier website
We develop and manufacture SAW filters for all frequency ranges up to 3 GHz according to customer requirements.
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Wire bondingWire bonding of up to several thousand wires, including multi-level bonding and 25 µm AlSi wire.
Source & evidence

Supplier website
Wire Bonding up to several thousand wires multi-level bonding AlSi wire 25µm
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Thin-film technologyThin-film processing with precision up to +/-10 nm and film thicknesses from 1 nm to 2500 nm.
Source & evidence

Supplier website
Thin film technology with a precision of up to +/-10 nm with thicknesses from 1nm to 2500nm
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Chip assemblyChip assembly, including plasma treatment with O2, Ar, and other gases and mixtures.
Source & evidence

Supplier website
Chip assembly Plasma treatment with O2, Ar and other gases and mixtures
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Customized sensor systemsWorks with customers to assemble a sensor system for their specific application.
Source & evidence

Supplier website
Wir stellen gemeinsam mit Ihnen ein Sensorsystem genau für Ihre Anwendung zusammen.
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Customer-specific SAW sensor development and manufacturingDevelopment and manufacture of SAW sensors according to customer requirements.
Source & evidence

Supplier website
We also develop and manufacture SAW sensors for you according to customer requirements.
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Product life-cycle supportSupport from chip design through prototype development to mass production.
Source & evidence

Supplier website
We support you from chip design to prototype development to mass production of your products.
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Entwicklung von SAW-VerzögerungsleitungenKonzepterarbeitung und Parameteroptimierung gemeinsam mit Kunden.
Source & evidence

Supplier website
Vorrangig Entwicklung nach individuellen Kundenanforderungen Konzepterarbeitung und Parameteroptimierung gemeinsam mit Kunden
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Fine leak tightness testingFine leak tightness testing, with tightness up to 10-9 mbar*l/s.
Source & evidence

Supplier website
Tightness up to 10-9 mbar*l/s ealing takes place under inert gas atmosphere, e.g. N2 / He2 mixture Purified dry air Sealing under different gas atmospheres, mixtures of 3 different gases possible Fine leak tightness test
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Wafer FoundryWafer production from development samples to mass production.
Source & evidence

Supplier website
The Wafer Foundry of SAW COMPONENTS offers you state-of-the-art technologies combined with 25 years of experience and a complete production made in Germany. We support you from the first development samples to mass production.
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Automated adhesive dispensingAutomated adhesive dispensing.
Source & evidence

Supplier website
Automated adhesive dispensing
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Industries served

Certificates & patents

Standard compliance

ISO9001

Source & evidence

Supplier website
Our production is certified according to ISO9001 and ISO13485 for medical devices.
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Standard compliance

ISO13485

Source & evidence

Supplier website
Our production is certified according to ISO9001 and ISO13485 for medical devices.
SAW COMPONENTS Dresden GmbH website
Checked 19 Oct 2026

Evidence & freshness

Every claim keeps its source. Company-reported information and independent verification are labelled separately. Spot something wrong? .

  • SAW COMPONENTS Dresden GmbH websiteSupplier websiteChecked 19 Oct 2026

    Supports 10 facts: Company name · Description · Laser processing · Package sealing and welding · Wire bonding · Chip assembly · Fine leak tightness testing · Automated adhesive dispensing

    2 more

    ISO9001 · ISO13485

  • SAW COMPONENTS Dresden GmbH websiteSupplier websiteChecked 19 Oct 2026

    Supports 8 facts: Company name · Description · SAW Filter · SAW resonators · Customer-specific SAW resonator development and manufacturing · Customer-specific SAW filter development and manufacturing · Customer-specific SAW sensor development and manufacturing · Location: Dresden, Germany

  • SAW COMPONENTS Dresden GmbH websiteSupplier websiteChecked 19 Oct 2026

    Supports 7 facts: Company name · Description · Microfluidic and covering with Dry Film Resist · Measurement and monitoring · Mask data processing · Thin-film technology · Wafer Foundry

  • SAW COMPONENTS Dresden GmbH websiteSupplier websiteChecked 19 Oct 2026

    Supports 6 facts: Company name · Description · SAW sensors · Contract manufacturing of customized chips and sensors · Flexible technology platform · Product life-cycle support

  • SAW COMPONENTS Dresden GmbH websiteSupplier websiteChecked 19 Oct 2026

    Supports 6 facts: Company name · SAW TEMP · SAW IDENT · Customized sensor systems · ISO 9001 certificate · ISO 13485 certificate

  • electronica 2026 exhibitor directoryTrade-fair listingChecked 26 Sept 2026

    Supports 6 facts: Company name · Description · Semiconductors · Aerospace & defence · Medical electronics · Location: Dresden, Germany

  • SAW COMPONENTS Dresden GmbH websiteSupplier websiteChecked 19 Oct 2026

    Supports 4 facts: Company name · SAW Bauelemente · ISO 9001 · ISO 13485

  • SAW COMPONENTS Dresden GmbH websiteSupplier websiteChecked 19 Oct 2026

    Supports 4 facts: Company name · Description · Entwicklung von SAW-Verzögerungsleitungen · ISO 9001

  • SAW COMPONENTS Dresden GmbH websiteSupplier websiteChecked 19 Oct 2026

    Supports 3 facts: Company name · ISO 13485 · ISO 9001

  • SAW COMPONENTS Dresden GmbH websiteSupplier websiteChecked 19 Oct 2026

    Supports 1 fact: Company name

  • SAW COMPONENTS Dresden GmbH websiteSupplier websiteChecked 19 Oct 2026

    Supports 1 fact: Company name

What to confirm

A starting point for your supplier conversation.

Manufacturing processesNo source confirms this yet
Services and capabilitiesNo source confirms this yet
CertificationsNo source confirms this yet
Order quantity & lead timeConfirm directly with the supplier

Get in touch

Company contactsales@sawcomponents.de
Contact sources

electronica 2026 exhibitor directory · 26 Sept 2026

Company contact+49 351 8872525
Contact sources

electronica 2026 exhibitor directory · 26 Sept 2026

Company contactsupport@sawcomponents.de
Contact sources

SAW COMPONENTS Dresden GmbH website · 19 Oct 2026

Company contact+49-351-8872510
Contact sources

SAW COMPONENTS Dresden GmbH website · 19 Oct 2026

Elsewhere online

LinkedIn

Business type

AI interpretation; these are estimates, not verification.

Manufacturer · 96%
Source & evidence

AI-inferred
Based only on `company`, does this company manufacture its own products (it produces them itself or in its own/controlled factories)?

Contract manufacturer · 92%
Source & evidence

AI-inferred
Based only on `company`, does this company manufacture or assemble products for other companies as a service (EMS, contract manufacturing, OEM/ODM production, PCB assembly for customers)?

Design & engineering services · 79%
Source & evidence

AI-inferred
Based only on `company`, does this company offer engineering or product-design services for customers' products (hardware, firmware, PCB layout, product development)?

Is this your company?

Manage products, locations and the facts buyers and agents can retrieve.

Claim this profile Free. A work email on the company’s domain confirms it instantly.

Is something on this profile wrong or out of date?

Answers grounded in company sources

AI can make mistakes. Check sources and confirm requirements with the supplier.